.
.
Item #101 Reproduction M31 liner
Correct grade of calf skin with leather grommets at the drawstring holes. The steel frame is marked as originals. All metal is of the correct gauge. European made. $70.00
.
.
Item #102 Reproduction M31 Chinstrap
Die cut leather with steel cast buckle. Machine sewn. An excellent copy made in Europe. $24.00
.
.
Item #103 Reproduction M31 Split-pins w/washers
Single piece prongs with applied sheet steel head. Zinc plated as were mid-war originals. European made. Sold in a set of three including the slotted washers. $15.00
.
.
Item #104 Reproduction M35 vent bushings
Made from Milled steel to original specifications. The diameter of the shank is taken from an original but it is important to note that not all original helmet shells had the same size hole for the bushing. Some widening of the hole(s) in your helmet may need to be done so these can be installed. European made. $20 per pair.
.
.
Item #105 Reproduction M31 Chinstrap aluminum buckle
European made. Stamped aluminum; made to exact M1931 specs. $10
.
.
Item #106 Reproduction M31 Chinstrap end-studs
European made. Milled Aluminum to exact specs. $10 pair
.
.
Item #107 Reproduction M1916 Leather framed liner
European made. Correct grade of calf skin, machine sewn white cloth pockets at the rear of each pad. The pads are machine sewn to an exact copy of the M1916 Leather liner frame. $70.00
.
.
Item #108 Reproduction M1917 Steel framed liner
European made. Correct grade of calf skin, machine sewn white cloth pockets at the rear of each pad. The pads are pressed into an exact copy of the M1917 steel liner frame. $70.00
.
.
Item #109 Reproduction M1916 Chinstrap (Brass hardware)
Die stamped Hardware (NOT laser cut) Correct weight vegetable tanned leather, hand-sewn as originals. European made. $30.00
.
.
Item #110 Reproduction M1916 Chinstrap (Steel hardware)
Die stamped Hardware (NOT laser cut) Correct weight vegetable tanned leather, hand-sewn as originals. European made. $30.00
.
.
Item #111 Reproduction M1916-1917-1918 split-pins
Stamped from correct steel alloy, individually soldered as originals. European made. $20 per set of three (including the thick-head pin for the rear.)
.
.
.
Be sure to click on this link check out my other website dedicated to other kinds of Militaria
Contact information:
To order or to ask questions:
E-mail address: wii1944@aol.com
Mailing address:
Ken Niewiarowicz
P.O.Box 582
Lapeer, MI 48446
U.S.A.